thrust bearing of the H-series Right Angle gearboxes

thrust bearing of  the H-series Right Angle gearboxes

The upper part of the vertical shaft (hollow shaft) adopts bearings that can withstand large thrust, which can meet the requirements of most pumps and different heads. In most cases, the thrust of the gearbox itself is mainly used to reduce the load of the water pump on the vertical shaft thrust bearing, so there is a minimum downward thrust to prevent the

separation of the vertical shaft thrust bearing.

Unless otherwise specified, the H-series gearbox is generally arranged in the DT manner shown in the diagram, corresponding to the "standard" thrust shown in Table 2.

If there is insufficient "upward thrust" or "downward thrust", the DF arrangement shown in the diagram can be used, corresponding to the "bidirectional" thrust shown in Table 2.

If the "downward thrust" exceeds the standard thrust value in Table 2, it can be selected according to heavy load, corresponding to the DT/DT layout shown in the diagram.

Heavy loads can also be arranged according to the DF/DT method shown in the diagram.

At this time, the downward thrust corresponds to the "standard" thrust value in Table 2, while the upward thrust is selected according to the "two-way" in Table 2.

Table 2 Thrust Value

China Right Angle Gearboxes manufacturer provides Right Angle Gearboxes with affordable prices and stable performance. For more information, please contact 008613974960765.